- Home
- Cross Bar
Cross Bar
Related Products
Sword End Singletree

Sword End Singletree
$16.95
Hickory singletree with tapered ends. Harness trace slips over wood. Wood blank which requires trace holders Available in 22", 24", 26", 28", 30", 32", 34", 36", 38", and 42" Center hole is not drilled. Needs a method of holding traces. Our trace holders work well. A singletree caster or stainless singletree caster helps to attach the single...
Hook End Singletree

Hook End Singletree
$26.95
Hickory wood singletree with hooks and ferrules at each end. 1 1/2" x 2". Available in 22", 24", 26" 28", 30", 32", 34", 36", and 38" long. Measured from wood to wood and do not include the hooks which add an inch on each end. Center hole is not drilled. Ferrules (not hooks) need to be primed and painted. A singletree caster or stainless single...
Hook End Singletree Blank

Hook End Singletree Blank
$19.95
Hickory blank singletree with no hooks or ferrules. Works nicely with 1" Trace Holder Chain Hooks or Fancy Singletree Ends Available in 22", 28" 34", 36", 38" or 42" Center hole is not drilled.
Trace Holders

Trace Holders
$19.95
For use on a sword end singletree on a carriage, cart, or buggy. Double spring and hook Brass or chrome 3.5" x 7/8" Heavy 1 7/8" between the holes on center Priced by the pair Should be stored in the down position. Left photo of carriage - Trace on singletree correctly Right photo of carriage - TRACE INCORRECT!

Springie Trace Holders - Plain steel
$3.50
Mounts on sword end singletree to keep traces from sliding off. Packaged with #6 3/4" screws. Priced per pair. Plain steel Trace slot slips over (around) the wood. See photo below.

Springie Trace Holders - Stainless
$7.50
Mounts on sword end singletree to keep traces from sliding off. Stainless steel. Priced by the pair. Screws included. Trace slot slips over (around) the wood. See photo below.
Singletree Wear Plate

Singletree Wear Plate
$12.00
For use on top of a horse carriage singletree under the carriage bolt to support the bolt. Brass - 4" x 1" Stainless - 2.25" - 1" Steel - 3" x 3/4" (needs to be primed and painted)
Tee Plate

Tee Plate
$0.95
Mounts to the top of the singletree, cross bar, and circle bar to support the carriage bolts. Plain steel to be primed and painted For 1/4" or 5/16" bolt Bend edges over curves of wood
Trace Holder Chain Hooks

Trace Holder Chain Hooks
$39.95
Solid brass singletree ends to hold draft-style chain end traces (also known as tugs in the draft world). Works on heavier singletrees that are not sword end Available in 1" or 1 1/4" (measured across the opening) End rotates so chain can be put on hook Priced by the pair - left and right Unpolished brass
Singletree Yoke & Caster

Singletree Yoke & Caster
$6.95
For attaching singletree to the cross bar so that it will pivot. For use in carts and buggies 2" wide caster fits between the singletree and cross bar. Yoke goes around both. Yoke is generally used only for heavier draft vehicles Cast Iron Carriage bolt not included Sold separately or as a kit

Singletree Caster - Stainless
$11.95
For attaching singletree to the cross bar so that it will pivot. Smaller size for smaller width singletrees. For use in carts and buggies 1 5/8" wide x 3" Fits between the singletree and cross bar Stainless Carriage bolt not included
Fancy Singletree Ends

Fancy Singletree Ends
$39.95
Fancy ends for a Blank Hook End Singletree on a special horse cart or carriage. 1 1/16th opening Special order - not in stock Brass or chrome Priced as a pair