- Home
- Sleigh Eagle Heads
Sleigh Eagle Heads
Related Products
Tee Plate

Tee Plate
$0.95
Mounts to the top of the singletree, cross bar, and circle bar to support the carriage bolts. Plain steel to be primed and painted For 1/4" or 5/16" bolt Bend edges over curves of wood
Axle Washers

Axle Washers
$7.95
Old style leather coil for Sarven hubs/wheels.
Hub Cap

Hub Cap
$38.95
Fits regular roller bearing PA bolted hub, or flush hub for 1" or 1 1/8" axles. Not made for true antique hubs. Hubs need to be threaded on the inside to accept these caps. Brass, chrome, or plain steel PRICED INDIVIDUALLY This is not an axle nut, and will not hold the wheel on the carriage.
Rein Rail

Rein Rail
$89.95
Add some shine to your carriage or cart dash with a rein rail! Fancy ends, smooth on outside so reins cannot get caught 34" is standard length we stock Measurement is from bolt hole to bolt hole on center Ends screw off so rod can be cut to a specific length and re-threaded. Custom lengths can be special ordered. Lengths smaller than 34", add...
Rein Rail End

Rein Rail End
$45.95
Rein rail end post. Screw on. Brass or chrome Does not include bolt Priced individually
Rein Rail Center Post

Rein Rail Center Post
$20.95
Center Post recommended for rein rails 36" or over for support in the center. Bolt included. Available in brass or chrome.
Rein Rail Ends - open

Rein Rail Ends - open
$29.95 $59.90
CLEARANCE! Different style rein rail end post. Screw on. Brass Does not include bolt or brass rod 5" tall x 3" wide Priced as a pair
Brass Carriage Bolt

Brass Carriage Bolt
$8.95
1/4" x 1 1/2" solid brass carriage bolt Usually used for attaching a brass rein rail. Priced individually We normally only keep half a dozen or so in stock.
Square Nut

Square Nut
$0.50
Traditional, antique style 5/16" nut for carriage and buggy axle clips.
Folding Seat Irons

Folding Seat Irons
$45.95
Folding seat iron brackets that allow the backs of seats to fold down when not in use. Must be primed and painted or powdercoated. Bolt holes need to be drilled. Priced by the pair
Roller Rub Iron

Roller Rub Iron
$21.95
Mounts on bottom of carriage box that is not cut under, so that the wheel does not catch under box when turning. Iron with 5/8 inch roller and stainless pins. Priced individually.
Cart Fender Brackets

Cart Fender Brackets
$69.95
Steel brackets to mount wood fenders on vehicles. Adjustable for Horse or Pony carts Must be drilled to mount fenders Set of four brackets Shipped separately from fenders