- Home
- Heavy Stainless Trace Holders
Heavy Stainless Trace Holders
Related Products
Brass Shaft Tips

Brass Shaft Tips
$16.95
Round brass shaft tip to protect the end of wooden shaft. Measured by the inside diameter; measure the diameter of the shaft for the correct size. Consider your total measurement if going over shaft trim. 7/8" interior diameter has 1 3/4" long exterior and 1 1/4" deep interior 1" interior diameter has 2" long exterior and 1 5/8" deep interior ...
Stainless Shaft Tips

Stainless Shaft Tips
$17.95
Round highly polished stainless shaft tip to protect the end of wooden carriage or buggy shaft. Measured by the inside diameter; measure the diameter of the shaft for the correct size. Consider your total measurement if going over shaft trim 7/8" interior diameter has 2" long exterior and 1 3/8" deep interior 1" interior diameter has 2" long ...
Shaft Trim Kit

Shaft Trim Kit
$47.95
Black imitation patent leather protects & finishes carriage, cart, and buggy shafts. Includes two 36" pieces for covering ends of carriage shafts, two 5" x 7" pieces for singletree, two 5" x 7" pieces for shafts, and four synthetic straps for around the singletree and shaft straps Also comes with ribbing and large tacks Can be trimmed to si...
Footman Loop

Footman Loop
$2.20
Used to attach holdback straps to vehicle. Available in 1 1/4" or 1 1/2" Available in brass or nickel plate 1 1/4" loop holes are 2 1/4" on center 1 1/2" loop holes are 2 5/8" on center Small quantity of 1 1/2" in what we think is zinc over steel PRICED INDIVIDUALLY
Heavy Footman Loop

Heavy Footman Loop
$3.95
A very heavy and stout footman loop. Available in stainless 1 1/2" or brass 2 1/4" (interior measurement, not hole to hole) Brass holes are 2 9/16" on center Suitable for larger vehicles Used to attach holdback straps to vehicle PRICED INDIVIDUALLY

Steel Old Fashioned Footman Loop
$2.75
Old style steel footman loop with larger opening for carriage and buggy shafts. 4 7/8" total length 1/2" wide Holes 2 7/8" and 4 1/8" on center Priced individually

Springie Trace Holders - Stainless
$10.95
Mounts on sword end singletree to keep traces from sliding off. Stainless steel. Priced by the pair. 6.5" long X 1/2" wide Trace slot slips over (around) the wood. See photo below.
Trace Holders

Trace Holders
$21.95
For use on a sword end singletree on a carriage, cart, or buggy. Double spring and hook Brass 3.5" x 7/8" Heavy 1 7/8" between the holes on center Priced by the pair Should be stored in the down position. Left photo of carriage - Trace on singletree correctly Right photo of carriage - TRACE INCORRECT!
Fancy Singletree Ends

Fancy Singletree Ends
$39.95
Fancy ends for a Blank Hook End Singletree on a special horse cart or carriage. 1 1/16th opening 4" long each - will generally add six inches to the wood singletree measurement Brass or chrome Priced as a pair
Trace Holder Chain Hooks

Trace Holder Chain Hooks
$55.95
Solid brass singletree ends to hold draft-style chain end traces (also known as tugs in the draft world). Works on heavier singletrees that are not sword end Available in 1" or 1 1/4" (measured across the opening) End rotates so chain can be put on hook Priced by the pair - left and right Unpolished brass
Whiffletree Ends

Whiffletree Ends
$24.95 $49.95
1.25" interior diameter 4.25" long Brass in stock Priced by the pair
Singletree Wear Plate

Singletree Wear Plate
$12.00
For use on top of a horse carriage singletree under the carriage bolt to support the bolt. Brass - 4" x 1" Stainless - 2.25" - 1" Steel - 3" x 3/4" (needs to be primed and painted)