- Home
- Steel Old Fashioned Footman Loop
Steel Old Fashioned Footman Loop
Related Products
Brass Shaft Tips

Brass Shaft Tips
$16.95
Round brass shaft tip to protect the end of wooden shaft. Measured by the inside diameter; measure the diameter of the shaft for the correct size. Consider your total measurement if going over shaft trim. 7/8" interior diameter has 1 3/4" long exterior and 1 1/4" deep interior 1" interior diameter has 2" long exterior and 1 5/8" deep interior ...
Stainless Shaft Tips

Stainless Shaft Tips
$17.95
Round highly polished stainless shaft tip to protect the end of wooden carriage or buggy shaft. Measured by the inside diameter; measure the diameter of the shaft for the correct size. Consider your total measurement if going over shaft trim 7/8" interior diameter has 2" long exterior and 1 3/8" deep interior 1" interior diameter has 2" long ...
Shaft Trim Kit

Shaft Trim Kit
$47.95
Black imitation patent leather protects & finishes carriage, cart, and buggy shafts. Includes two 36" pieces for covering ends of carriage shafts, two 5" x 7" pieces for singletree, two 5" x 7" pieces for shafts, and four synthetic straps for around the singletree and shaft straps Also comes with ribbing and large tacks Can be trimmed to si...
Footman Loop

Footman Loop
$2.20
Used to attach holdback straps to vehicle. Available in 1 1/4" or 1 1/2" Available in brass or nickel plate 1 1/4" loop holes are 2 1/4" on center 1 1/2" loop holes are 2 5/8" on center Small quantity of 1 1/2" in what we think is zinc over steel PRICED INDIVIDUALLY
Heavy Footman Loop

Heavy Footman Loop
$3.95
A very heavy and stout footman loop. Available in stainless 1 1/2" or brass 2 1/4" (interior measurement, not hole to hole) Brass holes are 2 9/16" on center Suitable for larger vehicles Used to attach holdback straps to vehicle PRICED INDIVIDUALLY

Springie Trace Holders - Stainless
$10.95
Mounts on sword end singletree to keep traces from sliding off. Stainless steel. Priced by the pair. 6.5" long X 1/2" wide Trace slot slips over (around) the wood. See photo below.
Trace Holders

Trace Holders
$21.95
For use on a sword end singletree on a carriage, cart, or buggy. Double spring and hook Brass 3.5" x 7/8" Heavy 1 7/8" between the holes on center Priced by the pair Should be stored in the down position. Left photo of carriage - Trace on singletree correctly Right photo of carriage - TRACE INCORRECT!

Heavy Stainless Trace Holders
$67.95
Did you ever have a trace holder break or a trace come off? These won't do either! Heavy trace holders for use on a sword end singletree on a carriage, cart, or buggy. 1.5" x 5/8" opening to slip over singletree ends Screw hole on bottom Fits larger, thicker sword end singletrees (we generally stock the thinner end ones) For slot end traces...
Fancy Singletree Ends

Fancy Singletree Ends
$39.95
Fancy ends for a Blank Hook End Singletree on a special horse cart or carriage. 1 1/16th opening 4" long each - will generally add six inches to the wood singletree measurement Brass or chrome Priced as a pair
Trace Holder Chain Hooks

Trace Holder Chain Hooks
$55.95
Solid brass singletree ends to hold draft-style chain end traces (also known as tugs in the draft world). Works on heavier singletrees that are not sword end Available in 1" or 1 1/4" (measured across the opening) End rotates so chain can be put on hook Priced by the pair - left and right Unpolished brass
Whiffletree Ends

Whiffletree Ends
$24.95 $49.95
1.25" interior diameter 4.25" long Brass in stock Priced by the pair
Singletree Wear Plate

Singletree Wear Plate
$12.00
For use on top of a horse carriage singletree under the carriage bolt to support the bolt. Brass - 4" x 1" Stainless - 2.25" - 1" Steel - 3" x 3/4" (needs to be primed and painted)